activeSWITCH 4.1 Administration Manual

activeSWITCH is a scalable telephony solution featuring a range of traditional telephony and emerging VoIP technologies. It offers a national/global voice network in addition to a complete range of Analog, Digital, and VoIP channels, all fully supported. Functionality includes: Voicemail, IVR, ACD Queues, Call recording/monitoring, Conferences, Auto Provisioning/Configuration, and much more. Getting Started System Overview […]

Read More

activeSWITCH 3.8 and OpenVox PCI cards

From version 3.8.3 activeSWITCH supports limited range of OpenVox cards: A400P A810P D130P/D130E A800P Card It is registered as Digium TDM800P, and act like one, which means configuration is identical. A400P Card It is registered as Digium TDM400P, and act like one, which means configuration is identical. D130P/D130E Card (T1/E1) It is registered as Digium […]

Read More

activeSWITCH 3.8 and Xorcom Astribank

activeSWITCH 3.8 integrates with Xorcom Astribank as trunk provider PRI/T1: Analog Ports Configuration activeSWITCH -> System -> Information should show You can verify the device presence using the console: # dahdi_hardware -v usb:002/007::xpp_usb+ e4e4:1162::Astribank-modular FPGA-firmware MPP: TWINSTAR_PORT=0 MPP: TWINSTAR_WATCHDOG=0 MPP: TWINSTAR_POWER[0]=1 MPP: TWINSTAR_POWER[1]=0 LABEL=[usb:X1067827] CONNECTOR=@usb-0000:00:1d.0-1.2 XBUS-00/XPD-00 E1 (31) Span 1 XBUS-00/XPD-10 FXS:(8) Span 2 XBUS-00/XPD-20 […]

Read More

activeSWITCH 4.0 API

Abstract This document can be used as a reference guide when using activeSWITCH API. It’s purpose is to help developers write 3rd party software to interact with activeSWITCH. Protocol activeSWITCH API works by sending and receiving either POST or GET requests via HTTP protocol. Authentication For authentication purposes an unique API key is used. API […]

Read More