activeSWITCH 5.0 End User Guide

Introduction activeSWITCH End User Guide activeSWITCH system is a scalable telephony solution featuring a range of traditional telephony and emerging VoIP technologies. The creation of a national/global voice networks in addition to a complete range of Analog, Digital, and VoIP channels, all fully supported. Functionality includes: Voicemail, IVR, ACD Queues, Real time all recording/monitoring, Conferences, […]

Read More

activeSWITCH 3.8.2 UAD Yealink user manual

Introduction This Configuration Guide is written as general guide on how to configure the Yealink phone models: SIP-T18P, SIP-T20P, SIP-T22P, SIP-T26P, SIP-T28P, SIP-T32G, SIP-T38P, SIP-T38G, SIP-T41P, SIP-T42G, SIP-T46G to work with activeSWITCH 3.8. Requirements Identifying phone model To start and successfully complete registration of your Yealink phone you need to know which phone model you […]

Read More

activeSWITCH 3.8.2 UAD Grandstream GXP-2124

PLEASE NOTE! THIS CONFIGURATION MANUAL IS NOT READY, WORK IN PROGRESS. Introduction This User Guide is written as a general guide on how to set up the Grandstream phone model GXP-2124 to work with activeSWITCH 3.8.2. Requirements Identifying phone model To start and successfully complete registration of your phone you need to check the phone […]

Read More

activeSWITCH 3.8.2 UAD Grandstream GXP-2000

Introduction Requirements Identifying phone model To start and successfully complete registration of your Grandstream phone you need to know which phone model you will setup. From the back of each Grandstream phone there are exact model information that you should check. Although different phone models can have exactly the same requirements and installation procedure, phone […]

Read More

activeSWITCH 3.8.2 UAD Polycom IP 5000 user manual

PLEASE NOTE!!! THIS USER MANUAL IS NOT READY – WORK IN PROGRESS!!! Introduction Requirements Identifying phone model To start and successfully complete registration of your Polycom phone you need to know which phone model you will setup. From the back of each Polycom phone there are exact model information that you should check. Although different […]

Read More

activeSWITCH 3.8.2 UAD Polycom user manual

Introduction This User Guide is written as general guide on how to set up the Polycom phone models: IP 301, IP 320, IP 321, IP 330, IP 331, IP 335, IP 450, IP 501, IP 550, IP 560, IP 601, IP 650 and IP 670 to work with activeSWITCH 3.8.2 Requirements Identifying phone model To […]

Read More

activeSWITCH 3.8 System Requirements

System Requirements What is needed to get the activeSWITCH up and running? Server Hardware Standard x86-compatible server hardware 1.6 GHz or faster CPU minimum (2.6 GHz or more recommended) Compatible processors include: Intel®: Celeron®, Pentium® II, Pentium III, Pentium 4, Xeon™, Core® series, Core® 2, Core® iX, Atom AMD™: Athlon™, Athlon MP, Athlon XP, Athlon […]

Read More

activeSWITCH 4.0 Startup User Guide Setup Wizard

After you completed activeSWITCH installation first thing you need to do is to go through the activeSWITCH Setup Wizard to configure basic settings like login credentials, network settings, locality, etc. Setup Wizard Setup Wizard is designed to collect essential data in order to get the system up and running. After the setup wizard has finished, […]

Read More